– Windows server 2012 r2 standard requirements free

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Microsoft Windows Server R.2 Standard bit: Marketing Information: Take a closer look. With Windows Server R2 you can scale to run your most important workloads with robust recovery options. You’ll achieve value quickly with a wide range of cost-effective, high-performance storage options and simplified delivery of multi-tenant IT. Windows Server is the sixth version of the Windows Server operating system by Microsoft, as part of the Windows NT family of operating systems. It is the server version of Windows based on Windows 8 and succeeds Windows Server R2, which is derived from the Windows 7 codebase, released nearly three years earlier. Two pre-release versions, a . Windows NT is a proprietary graphical operating system produced by Microsoft, the first version of which was released on July 27, It is a processor-independent, multiprocessing and multi-user operating system. The first version of Windows NT was Windows NT and was produced for workstations and server was a commercially focused operating system .
 
 

Windows server 2012 r2 standard requirements free

 

Computers running bit processors can hypothetically handle hundreds of terabytes of RAM. However, RAM demands are increasing. In terms of size, for high-end workstations 16GB minimum is probably best, whereas for more budget friendly home set ups, 8GB should about do. Size of Database s : The most important consideration due to its direct impact on processing needed to populate a data warehouse, if the database is 50 GB or under then 16 GB of RAM is sufficient.

Execution Packages: The more RAM your server is equipped with, the faster it will complete execution packages. There only time I might give a file server more than 2 cores is if it is very busy doing a lot of DFS Replication.

The most important variable is number and type of drives, and RAID type. Windows Server is just an Operating System. It can run on a normal desktop PC. In fact, it can run in a Hyper-V simulated environment that runs on your pc too. After a few minutes, you receive the Windows Server R2 screen shown in Figure Click Install now to begin the installation.

Figure Starting the installation of Windows Server R2. Windows copies temporary files and then displays the Get important updates for Windows Setup screen shown in Figure Figure This screen enables you to select either the complete installation of Windows Server R2 or the Server Core option.

You receive the options shown in Figure to upgrade or install a clean copy of Windows Server R2. Select Custom advanced to install a clean copy of Windows Server R2. The upgrade option is available only if you have started the installation from within Windows Server , Windows Server R2, or the original version of Windows Server Take a coffee break while the installation proceeds.

This takes some time particularly when installing on a virtual machine , and the computer restarts several times. As shown in Figure , Setup charts the progress of installation. Type and confirm a strong password. When informed that the password is changed, click OK. After a minute or so, the desktop appears, containing a command window but no Start screen or desktop icons see Figure This is the standard Windows Server Core interface. All configuration, management, and troubleshooting of Windows Server Core is done from the command line.

Available utilities enable you to perform almost all regular configuration tasks in this fashion. Table describes some of the more useful available commands. Joins an Active Directory domain. You will be prompted for the username and password of a user with domain administrator privileges.

Configures and manages a series of common Server Core installation properties. See Figure Figure The Sconfig. We discuss many Server Core commands and PowerShell cmdlets in various chapters of this book and other Cert Guide books in this series. Although Microsoft markets Server Core as being the default Windows Server R2 installation, the full GUI version still represents the most easily managed version of the server.

Windows displays a Welcome message and prepares your desktop. Then the desktop with Server Manager shown in Figure appears. When you shut down a Windows Server R2 computer, it displays the Shutdown Event Tracker dialog box, which asks you for a reason for shutting down the server. For learning purposes, it is helpful to disable this item. You can do so by typing gpedit. On the dialog box that appears, click Disabled and then click OK. You cannot upgrade a Windows Server or older computer or a computer running any client version of Windows to Windows Server R2.

This command returns the index number for the server with a GUI image. Then type the following command:. Use the following PowerShell command in place of those given in steps 2 and To install the complete desktop experience on your server including access to Windows Store apps as in Windows 8 or Windows 8. This mode adds a link to Windows Store on the Start screen, as shown in Figure :.

Installing the minimal server interface on your server requires you to remove the Start screen shell. Use the following PowerShell command and then restart your computer. You receive a command prompt window and the Server Manager console as previously shown in Figure As an organization grows, administration of servers can become become quite overwhelming to manage. To help balance the workload and create a smooth support process, a delegation model should be implemented.

Implementing a delegation model involves the following:. Preparing for a delegation model requires some planning up front.

Deciding how to manage your systems administration can be a frustrating task. The key to success is to define a model that best works for your situation, agree upon the long-term strategy, and discipline those involved to stick with the model. There are three basic strategies to select from when deciding how to manage your environment:. Containing characteristics of both decentralized and centralized models, the shared or delegated approach focuses on centralized policies and procedures governed by the enterprise admins.

This approach is hierarchical in nature in that many layers of administration can be defined. For example, the main office might contain the majority of the systems. These systems are managed by senior administrators or an enterprise admin group. Desktop engineers might be delegated administrative access to all desktops but might escalate issues to site admins or even enterprise admins if necessary.

Once a delegation model has been selected, the next step is to decide how to delegate access. Depending on the server, installed roles, and applications installed, there are different ways to delegate access. In some cases, applications or roles include an interface where elevated access is granted. In most other situations, local built-in groups can be used to grant different access to different delegates depending on their function.

For example, suppose you have delegated backup duties to a small team of junior administrators. To help streamline this in larger organizations, you might consider additional layers of group nesting along with group policy to push down the elevated access to a group of servers.

This method provides a more scalable solution as expanding delegate access is as simple as adding more junior admin accounts to a domain group. The domain group is then automatically added to the backup operators local group on the servers. Active Directory will be discussed in more detail later. Refer to Table for a listing of built-in local groups and their functions. Grants full access and control to the computer. Allows members to change and manage permissions and access to the computer.

Ability to back up and restore files regardless of the permissions assigned to the folder or files. These users are unable to modify and manage permissions.

Users are granted virtually no access to the system other than to use the Internet and basic applications. They are granted temporary profiles upon logon. Limited access to log on to the computer.

Allows users to run applications, use local devices and peripherals but not make administrative changes. When delegating administrative tasks, it is a good practice to create separate delegate accounts for users.

The idea is to operate on the principle of least privilege, meaning for normal operations you would use a standard user account with enough access to perform your job. When elevated privileges are required, invoke the run as function or log in with your delegate account. This reduces the risk of unintentional changes that could make for an unpleasant day for the admin.

You can assign different sets of administrative responsibility to different users, and these can include segments of the directory structure such as OUs or sites. The following are several benefits of delegating administrative control:. When designing your AD DS forest structure, you should keep in mind the administrative requirements of each domain. Each domain has the capability to contain a different OU hierarchy. The forest administrators, who are members of the Enterprise Admins group, are automatically granted the ability to create an OU hierarchy in any domain within the entire forest.

Domain administrators, who are members of the Domain Admins group in each separate domain, by default are granted the right to create an OU hierarchy within their own domain. When you initially create your OU design, you should do so to enable administration. After that, you should create any additional OUs required for the application of Group Policy and management of computers. The final step in delegating administrative duties is identifying the toolsets available to your delegates.

Microsoft has provided us with the following tools to help with administrative tasks:. Before using administrative tools, you must first ensure that the necessary access rights have been granted and that you have addressed any prerequisites, such as. Net Framework 4. It helps administrators cut down on repetitive tasks by defining prebuilt configurations that accompany PowerShell 4. Configuration parameters are saved in a Managed Object File MOF and can be used as a baseline for comparison or as a template for new deployments.

DSC is often used in the following situations:. DSC works via two basic methods: Pull and Push. The Pull method works through the use of a Pull Server. Using this method, you can configure a server as the Pull Server, which acts as central configuration repository storing the configuration data for computers. In large environments, nodes can be configured to pull from the server as they come online. The second method is the Push method. In smaller implementations, a central server can be configured to Push DSC configurations.

As an administrator, you also have the ability to use a combination of both Pull and Push methods. DSC works through the basis of defining configurations within scripts. Using Notepad, you can build a custom DSC configuration. Configurations contain several components, all of which are organized within a configuration block.

The keyword Configuration tells PowerShell that a specific configuration is to follow. Together, both of these items create the foundation of a configuration block. The basic structure of a configuration block is. Inside the configuration block, node blocks are identified. A node represents a computer in the environment. Nodes are used when you need to apply a configuration block to a specific computer or computers. Multiple node blocks can be created within a configuration block, although a configuration block does not have to contain any node blocks.

Depending on the requirements, you might need to use node blocks. Inside the node blocks, resource blocks can be identified. Resource blocks are used to configure specific resources. These can be configured manually, or you can use several prebuilt resources available within the PowerShell framework.

Some of the built-in resources include. Resource blocks are identified by a resource name followed by an identifier. For example, to add configuration details to ensure that the Web-Server role is installed for MyComputer1 , use the following syntax:.

After you have created the appropriate configurations, save it as a PowerShell script. To invoke the configuration, execute it via an administrative PowerShell session. Invoking the configuration creates the MOF file in the working directory containing the configuration block script. To execute the configuration, run the command:. The intent of this section was to provide a high-level overview of DSC and how to use it. There are a variety of configuration parameters and best practices that go beyond the scope of this Cert Guide.

In any large-scale deployment, imaging technology will be one of your strongest allies. Microsoft has continued to evolve its imaging process through enhancements made to the Windows Deployment Services WDS role. WDS is covered in the Cert Guide , but in this section, we will assume you already have a prebuilt image and are looking to perform offline servicing of the image.

So what is meant by servicing an image, and why offline? Historically speaking, updates to images required the administrator to deploy a new computer from the image, run through any customizations or updates, repackage the image, and upload it back to the repository. This is often a lengthy process—especially when only minor updates are required. For these instances, Microsoft has provided the ability to inject updates to a Windows image file.

Scenarios in which images require updating include. DISM takes the legwork out of the mix by enabling an administrator to mount the image file, similar to mounting a hard disk, and issue commands to update the image.

When the updating is complete, changes are committed to the image and the file is unmounted, in which case the image is ready for the next deployment. Some key points and best practices to consider when using DISM:. DISM is typically used for updating offline images, but it can also be used to update servers that are online especially in cases when you need a fast method to standardize or update to a higher edition of Windows.

There are several parameters you should understand when servicing images. Table outlines some of the key parameters:. Used to gather information from the image file such as index number, image name, description, and image size.

Parameter used to mount the image. When mounting the image, you must also specify an in index number or the name associated with the image. Directory in which the image is mounted to. For optimal performance, this should be on the local computer that is updating the image. Use this switch when experiencing trouble with mounting images that might have been previously mounted. Adds one or more install packages or cabinet files.

When applying multiple packages, packages are listed in the order in which they should be installed. Adds a driver to the offline image. Produces a list of Packages from the mounted image in the mount directory.

Unmounts the image. Used to change an offline windows image to a higher edition. This list is introduces only a few of the DISM parameters. The first thing you need to do is obtain a copy of the source image.

In this example, we will use one of the default Windows image files found on the Server installation media and extracted by a WDS server. To enable a feature in an offline image, perform the following steps:. Using either the index number or name of the image, mount the image to a temporary mount directory. This will extract the contents of the image Figure to a directory structure in the temp mount directory specified. This process might take time depending on the speed of your computer. Review the current state of the Remote-Desktop-Services feature.

Shown in Figure , take notice that the feature is currently disabled. Enable the Remote-Desktop-Services feature in the offline image by executing the command shown in Figure Commit changes to the image and unmount the.

This will repackage the image file with the changes made. It might take some time depending on the speed of your computer. When unmounting images, it is important to close all windows and applications, especially File Explorer windows.

This will help prevent locks during the unmounting process. As discussed previously, remote management of servers is extremely helpful for an administrator, especially in scenarios in which your organization is driving a centralized management approach or if you are managing a group of Server Core installations.

Before remote management can occur, the remote servers must be configured to enable remote management. This is on by default for new installations but can be changed by navigating to the Local Server properties of Server Manager as shown in Figure Figure Server Manager Remote Management.

 

System Requirements and Installation Information for Windows Server R2 | Microsoft Docs.

 
Database Server—Minimum Hardware Requirements ; Processor. bit, 4 core. bit, 4 core ; Memory. 4 GB. 4 GB ; Hard Disk. GB (for data drives). 80 GB (for. System Requirements For Windows Server · Memory (RAM): MB of RAM required. · Hard Disk Space: 5 GB of free space required. · Processor: Intel Dual Core. Windows Server R2 is a proven, enterprise-class cloud and datacenter platform that can scale to run your largest workloads while enabling robust recovery.